11.6 Wide Screen Touch Industrial Monitor

TM-DPC116
11.6-inch widescreen pcap touch screen display
● 11.6’’ TFT LCD, LED backlit, Resolution 1366*768;
● Projective capacitive multi-points (10-points) touch;
● Aluminum-magnesium alloy, anodic treatment;
● Multi DVI+VGA signal input, Panel mounting;
● DC 12V power input, Optional with wide-voltage 9~36V;
● Optional No-touch feature, with tempered glass.

Send Inquiry

Product Overview:

TAICENN TM-DPC116 series is an enhanced stability and reliability industrial 11.6 wide screen touch industrial monitor product. The design uses a multi-point (10- points) projective capacitive touch screen, and it can fulfill front panel NEMA/IP65 dust-proof and water-proof standards.

The 11.6 wide screen touch industrial monitor TM-DPC116 uses full-sealed box construction, and its front panel complaints NEMA / IP65 waterproof and dustproof standard, to prevent installation in the control cabinet because of the scene splashing water droplets and water vapor into the host and thus affect equipment operation; high-strength steel box structure, so that it can adapt to the harsh industrial site work environment, the most suitable for factory automation, machinery manufacturing, CNC equipment, textile equipment, communication networks, power automation and other industrial applications.


FAQ1: Is TM-DPC116 wide screen display panel?

Yes. TAICENN 11.6 wide screen touch industrial monitor TM-DPC116 is wide screen display panel. When monitors are sold, the quoted size is the diagonal measurement of the display area. Because of the different ratio, a 16:9 monitor will have a shorter height than a 4:3 monitor of the same advertised size.

Since computer displays are advertised by their diagonal measure, for monitors with the same display area, a widescreen monitor will have a larger diagonal measure, thus sounding more impressive. Within limits, the amount of information that can be displayed, and the cost of the monitor depend more on area than on diagonal measure. TM-DPC116 use wide screen 1366 x 768 resolution LCD display panel.


FAQ2: What’s means on IP66?

Depending on your project, the differences between these three ratings can be very important. A fixture rated with any of the three of these ratings is equally protected against dust, dirt, sand, and debris (as indicated by the “6” digit). The liquid/water protection for each of these three ratings is unique.

An IP66 rated fixture is protected against multi-directional, high-pressure water jets. To pass IP66 testing, the fixture must be able to withstand water projected from 0.50-inch nozzle, multi-directional, high-pressure jets. This test must be run for a minimum of three minutes, at a distance of three yards, with a water volume of 26.4 gallons per minute and a pressure of 100 kPa.

TAICENN 11.6 wide screen touch industrial monitor TM-DPC116 specially designed for our customers, but its IP rating is only surface IP65 rating, rather than IP66.


Basic Parameter

Button

OSD Button in back panel

Overall Dimension

303.2 x 193 x 36

Hole Dimension

297 x 187

Structure

Front Panel: Aluminum-magnesium alloy, anodic treatment
Back panel: SGCC

Mounting

Panel Mounting, Support VESA

Display port

1*DVI, 1*VGA

New weight

2 KG

LCD

Size/Type

11.6’’ TFT LCD

Resolution

1366 * 768 (WXGA)

Backlit

WLED

Brightness

275 cd/m2

Backlit MTBF

30 000 hours

Contrast ratio

450: 1

Display area

256.125 x 144 mm (H*V)

Viewing angle

60/60/35/55 (Typ.)

Color

16.7M

TOUCH

Type

Projective capacitive (P-cap.)

Interface

USB (Optional RS232)

Transparency

>90±3%

Touch points

Multi-points, Max. up to 10 Points

Durability

>100 000 000 times

Surface hardness

Mohs 6H

Operating force

≤10g

Treatment

Surface anti-fingers

Power &Environmental

Power Input

DC 12V (Optional DC 9~36V)

Power consumption

10W

Working temperature

0℃~+70 ℃

Storage temperature

-30℃~+80 ℃

IP rating

Surface IP65

Relative humidity

10~95%@10℃(No condensation)

Vibration

50~500Hz,1.5G,0.15mm peak to peak

Shock

10G/peak(11ms sec)

Certification

CE/ROHS/FCC


FAQ3: What is a projected capacitive touch?

Projected capacitive touch (PCT) technology is a capacitive technology which allows more accurate and flexible operation, by etching the conductive layer. An X-Y grid is formed either by etching one layer to form a grid pattern of electrodes, or by etching two separate, parallel layers of conductive material with perpendicular lines or tracks to form the grid; comparable to the pixel grid found in many liquid crystal displays (LCD). TAICENN 11.6 wide screen touch industrial monitor has a real good touch performance.


Ordering Information:

TM-DPC116

11.6’’ TFT LCD, 1366*768, P-cap touch, 1*DVI, 1*VGA, DC 12V, 40W power adapter, Cables

TM-DPC116W

11.6’’ TFT LCD, 1366*768, P-cap touch, 1*DVI, 1*VGA, DC 9~36V, Cables

TM-DPG116

11.6’’ TFT LCD, 1366*768, P-cap touch, 1*DVI, 1*VGA, DC 12V, Cables

TM-DPG116W

11.6’’ TFT LCD, 1366*768, P-cap touch, 1*DVI, 1*VGA, DC 9~36V, 40W power adapter, Cables


Hot Tags: 11.6 wide screen touch industrial monitor, suppliers, manufacturers, factory, customized, made in China
Related Products

Copyright © TAICENN Technology Co.,Limited All Rights Reserved.