For enquiry (Roger Ge):
For support (Eason Tsang):
wide screen pcap touch panel monitor
● 21.5’’ TFT LCD, LED backlit, Resolution 1280*1024;
● Projective capacitive multi-points (10-points) touch;
● Aluminum-magnesium alloy, anodic treatment;
● Multi DVI+VGA signal input, open frame mounting;
DC 12V power input, Optional with wide-voltage 9
TAICENN TM-OC215 series is an enhanced stability and reliability industrial wide screen pcap touch panel monitor product. The design uses a multi-point (10- points) projective capacitive touch screen, and it can fulfill front panel NEMA/IP65 dust-proof and water-proof standards.
The wide screen pcap touch panel monitor TM-OC215 uses full-sealed box construction, and its front panel complaints NEMA / IP65 waterproof and dustproof standard, to prevent installation in the control cabinet because of the scene splashing water droplets and water vapor into the host and thus affect equipment operation; high-strength steel box structure, so that it can adapt to the harsh industrial site work environment, the most suitable for factory automation, machinery manufacturing, CNC equipment, textile equipment, communication networks, power automation and other industrial applications.
FAQ: Main Differences Between IP65, IP66, and IP67
Depending on your project, the differences between these three ratings can be very important. A fixture rated with any of the three of these ratings is equally protected against dust, dirt, sand, and debris (as indicated by the “6” digit). The liquid/water protection for each of these three ratings is unique.
IP65 – Water resistant
IP66 – Water resistant against powerful jets
IP67 – Protected against complete temporary water submersion
A fixture with an IP rating of 65 is protected against multi-directional, low-pressure water jets. In order to pass testing and achieve an IP65 rating, fixtures must be able to withstand water projected by a 0.25-inch nozzle. To achieve satisfactory results, this test must be run for a minimum of fifteen minutes, with the water source placed three yards from the fixture. Additionally, the water pressure must be 30 kPa with water volume of 3.3 gallons per minute.
TAICENN wide screen pcap touch panel monitor TM-OC215 support front panel IP65 rating protection.
An IP66 rated fixture is protected against multi-directional, high-pressure water jets. To pass IP66 testing, the fixture must be able to withstand water projected from 0.50-inch nozzle, multi-directional, high-pressure jets. This test must be run for a minimum of three minutes, at a distance of three yards, with a water volume of 26.4 gallons per minute and a pressure of 100 kPa.
A fixture rated at IP67 is protected from water immersion between 5.9 inches and 39.37 inches. To pass IP67 testing, the fixture must not permit ingress of harmful quantities of water when fully immersed. There must be at least 5.9 inches of water above the fixture for the test to be valid.
OSD Button in back panel
533.4 x 331.2 x 55
529.4 x 327.2
Front Panel: Aluminum-magnesium alloy, anodic treatment
Open frame mounting, support VESA
Support DVI + VGA
12V (Optional 24V)
21.5’’ TFT LCD
1920 * 1080
30 000 hours
478.0 x 269.8
Projective capacitive (P-cap.)
USB (Optional RS232)
>100 000 000 times
IP65 rating in front panel
50~500Hz,1.5G,0.15mm peak to peak
FAQ: What is VESA mount for a display monitor?
The Flat Display Mounting Interface (FDMI), also known as VESA Mounting Interface Standard (MIS) or colloquially as VESA mount, is a family of standards defined by the Video Electronics Standards Association for mounting flat panel monitors, televisions, and other displays to stands or wall mounts. TAICENN wide screen pcap touch panel monitor TM-OC215 is optional support VESA mount.
21.5’’ TFT LCD, 1280*1024, P-cap touch, 1*DVI, 1*VGA, DC 12V, 40W power adapter, Cables
21.5’’ TFT LCD, 1280*1024, P-cap touch, 1*DVI, 1*VGA, DC 9~36V, Cables
21.5’’ TFT LCD, 1280*1024, P-cap touch, 1*DVI, 1*VGA, DC 12V, Cables
21.5’’ TFT LCD, 1280*1024, P-cap touch, 1*DVI, 1*VGA, DC 9~36V, 40W power adapter, Cables